Some Practical Information About How To Become A Gunsmith

A gunsmith is trained to build and repair guns and various other varieties of firearms. There's a lot of specializations throughout field and an interested candidate can pick from among designer, finisher, manufacturer, gun engraver, etc., amongst others. A profitable career in the gunsmithing profession involves mastering an array of skills that can include woodworking, metal engraving, knowledge of mathematics and science, and mechanical expertise. This post aims to list the educational requirements along with other prerequisites to be a gunsmith.

Preparation

The best gunsmith should have an aptitude for learning technical skills as guns are designed to exacting standards and precise measurements. The gunsmith will typically have an innate interest on the history of guns and their production methods. Many gunsmiths may also be hobbyists or collectors of guns. It is necessary that gunsmiths should know about the importance of handling guns and their accessories safely. Different states have different gun laws and it's crucial for you to be familiar with the local rules.

Prerequisites for Application

Should you be interested in becoming a gunsmith, a few conditions must be satisfied in order to become enrolled into a gunsmith school. They are:

  • You'll need to be 21 years or older.
  • You must be interested in learning technical skills that include grinding, polishing, woodworking, etc.
  • You must not have felony convictions. Anyone with a record of domestic violence or any sort of restraining orders cannot submit an application for gunsmith training programs.
  • You must have a high school diploma or equivalent.

How to Become a Gunsmith – Training Options

There are many choices to pick with regards to gunsmith training. However, it's important to be sure that the school and also the course which they offer are accredited by the appropriate authorities.

Gunsmith trade school : These lessons are made available from vocational schools and community colleges. They furnish the most practical hands-on training. The courses are created to teach how to build, customize and repair guns.

Online gunsmith schools: An internet based gunsmith school may be fitting when you experience difficulty in traveling out and learn in a regular school. This course, in this case, is often learned without leaving the premises of your home. These are generally less expensive than regular gunsmith schools. The courses may also be finished in a shorter time as compared to a normal school. However, make sure that the course is a recognized one and it offers subjects which are appealing to you before you enroll into an on-line course.

Gunsmith apprenticeship: It's smart to be the apprentice of any certified and famous gunsmith. If your real interest is guns, you can discover the trade from experienced hands within a short span of time while getting paid for it. However, you will need to ascertain that the gunsmith you intend to work for has sufficient experience and will give you information that's both right and relevant in relation to guns, their manufacture and maintenance.

Short-term courses in gunsmith schools: Some institutions offer short-term courses in related subjects throughout the spring and summer months, the time of which varies from a few days to weeks.

Launching a Career As a Gunsmith

Most gunsmith courses (both online and traditional) provide scope for gaining comprehensive knowledge on the subject. However, to launch a rewarding career as a gunsmith, it is necessary that you undergo an apprenticeship under a good gunsmith to discover the tips and tricks and gain in-depth knowledge. A professional gunsmith should also acquire the appropriate licenses including the FFL (federal firearms license) which allows him / her to keep possession of someone else's firearm for more than a day. Additionally, it is valuable to specialize or focus in a certain area of ​​the subject such as designing, engraving, stockmarking, etc.

Additionally, it is of great value to work for armories and large firearm manufacturers and gain experience. This can help to advance your career or maybe develop your own gunsmith business.

How to Get Your Cosmetology Licensing in Colorado

Congratulations! You've chosen to pursue a career as a cosmetologist in Colorado – which means you need to get your cosmetology licensing. This article outlines the steps you need to take to legally practice cosmetology in the state of Colorado by getting your license for cosmetology.

3 Steps to Getting Your Cosmetology Licensing

  1. Get an education from a state licensed school of cosmetology.
  2. Earn your cosmetology certification.
  3. Take and pass the state board of cosmetology exams.

Step 1: Get an education from a state licensed school of cosmetology.

Finding a school of cosmetology in or close to your area of ​​Colorado should be no problem. Start with an internet search including the name of the closest city near you. Find everything from specialized cosmetology schools to career colleges, which feature professional in-school cosmetology salons for hands-on training and experience that employers look for.

Step 2: Earn your cosmetology certification.

Once you have found your cosmetology school of choice, get to work! Certification may be less than 15 months away. The following is a list of cosmetology certification and licensing requirements for Colorado.

Colorado State Board of Cosmetology Licensing Requirements

  • Cosmetologist: 1800 (60 credits)
  • Barber: 1500 (50 credits)
  • Cosmetician: 600 (20 credits)
  • Manicurist: 600 (20 credits)
  • Hairstylist: 1200 (40 credits)

Step 3: Take and pass the state board of cosmetology exams for Colorado.

Now that you've checked off the first 2 steps, it's time to get in touch with the Colorado State Board of Cosmetology and get your cosmetology license.

Applying online for a Colorado license in cosmetology if you've never had a license from any other state:

  1. Go to the Colorado State Board of Cosmetology for information and you will be rerouted to the Pearson Vue website.
  2. At the Pearson Vue Website, download the application to apply for Colorado Licensure.
  3. Choose the practical skills examination you are applying for, such as Cosmetology, fill in your licensure history and pay the required exam fee of $ 75 and application fee of $ 30.
  4. Take and pass the practical skills examination
  5. Apply and pay a $ 30 fee for the written examination.
  6. Take the written examination.
  7. Receive your Colorado Cosmetology License and be qualified to work as a cosmetologist in the state of Colorado.

Applying for a cosmetology license in Colorado if you already have a license from another state:

Colorado uses licensure by endorsement for anyone holding an active cosmetology license issued by another state.

  1. Apply for licensure by endorsement.
  2. Pay the required fee.
  3. Provide proper documentation.
  4. Fill out all the appropriate eligibility forms.

Summary

Start on the right path to success with professional career in Cosmetology. Follow these 3 simple steps to become a practicing Colorado State Licensed Cosmetologist. Start your career training today at a Cosmetology school near you.

Where do I go?

Colorado Board of Cosmetology Contact Information

Colorado Office of Barber and Cosmetologist Licensing

1560 Broadway, # 1350, Denver, CO 80202

(phone) 303-894-7772 www.dora.state.co.us/Barbers_Cosmetologists/licensing.htm

Pearson Vue Contact Info: www.asisvcs.com/indhome.asp?CPCAT=2006STATEREG

How To Join The IBEW Apprenticeship

What is the IBEW Apprenticeship?

The apprenticeship is a joint program between the International Brotherhood of Electrical Workers (IBEW) and National Electrical Contractors Association (NECA). This training program was formally known as the National Joint Apprenticeship Training Committee or NJATC, and is now the electrical training Alliance.

Alliance was developed to reach beyond the textbook and use blended learning by enabling, "students to continue training remotely, bridging the gap between an apprenticeship and learning in the classroom."

Alliance is encouraging the use of new technologies so instructors and students can connect virtually. The allows instructors to spend less time reviewing homework and increase the amount of hands-on instruction for students.

As of now, not every apprenticeship has transitioned to blended learning.

IBEW Apprenticeship Training

Trade-related classroom training produces competency and pride that leads to true craftsmanship. This is what the union prides itself on!

In addition to on-the-job training, you'll receive a true hands-on environment that mimics work in the field and covers a variety of aspects you'll encounter on the job.

Classroom education can't teach you everything, however, it does provide a solid foundation for you to build on and develop your skills.

The five step process to starting your IBEW Apprenticeship:

# 1. Decide Which Program Is Right For You

The first thing is to locate an IBEW apprenticeship learn about the training programs they offer.

Choices can include:

Outside Lineman, Inside Wireman, Technician (Sound & Communication), and Residential Wireman

You need to understand that each apprenticeship does not offer all programs. The outside lineman apprenticeship is only offered at training centers specifically tailored to that program.

In some cases, you may find an apprenticeship like the Puget Sound Electrical JATC that offers three programs; Construction Apprentice (inside wireman), Sound and Comm (technician), and Residential.

Wages for an apprentices are based on a percentage of Journeyman scale. At first glance the wages for a 1st year apprentice are low. However, they do increase in increments following a time frame of 6 to 12 months or 1000 hours of work completed.

Wages fluctuate between IBEW local unions, from city to city, and state to state. The west coast and upper east coast apprentices earn higher wages than those in the south, but you must remember the cost of living is must higher in those areas as well.

# 2. Applying To The Apprenticeship

A few training centers have online applications but in most cases you'll have to fill out actual paperwork. Filling out lengthy paperwork can be a dreadful task, but fortunately for you this time will be different because a new beginning is right around the corner.

Once you begin you're going to have to start digging for high school or college transcripts and try to remember the last four addresses you've lived.

Fill out everything. Write legibly. If your handwriting is poor, have someone who can write legibly fill it out.

Don't leave anything blank! If you absolutely have to leave something blank call the training center office and ask them what you should do. Its always better to check with the ones who will be handling your application.

General requirements for applicants are as follows:

Minimum age 18
Be a high school graduate, or have your GED, or have a two-year Associate Degree or higher
Show successful completion of high school algebra or post high school algebra course with a passing grade
Provide an official transcript for high school and post high school education and training. If applicable, GED records must be submitted

Note: Some programs have additional basic requirements such as drug testing, a physical examination, security background check, or a valid driver's license. If you have been working in the electrical construction industry and meet specific work hour requirements, the training center you're applying to may wave the minimum requirements as long as you provide indisputable documentation proving your work hours.

# 3. Preparing For and Passing The Aptitude Test

This is where you want to do your absolute best and make a very high score! I can't stress this enough because applicants for the apprenticeship are ranked highest to lowest, and those scoring highest are invited to interview first. The aptitude test consists of two parts; Algebra and Functions, and Reading Comprehension. The test takes approximately two and a half hours to complete with a break between the two parts.

IBEW Apprenticeship Math Test

Algebra and Functions portion has 33 questions with a 46 minute time limit. Reading Comprehension has 36 questions with a 51 minute time limit. With only 33 questions there is little room for error. You need to be prepared so you can limit wrong answers.

Here's a few math problems to test your ability.

Algebra Sample

1. Consider the following formula: A = B + 3 (4 – C)

If B equals 5 and C equals 2, what is the value of A?

A.7
B.11
C.12
D.17

2. Consider the following formula: y = 3 (x + 5) (x – 2)

Which of the following formulas is equivalent to this one?

A. y = 3 x 2 + 9x-30
B. y = x2 + 3x-lO
C. y = 3 x 2 + 3x-lO
D. y = 3 x 2 + 3x-30

3. Consider the following pattern of numbers: 110, 112, 107, 109, 104

What is the next number in the pattern?

A.97
B. 99
C. 106
D.109

4. Consider the following formula: a = 1/2 b – 4

Which of the following statements is true for this formula?

A. When the value of b is less than 8, a is negative.
B. When the value of b is greater than 8, a is negative.
C. When the value of b is less than 8, a is positive.
D. When the value of b is greater than 4, a is positive.

If you need to brush up on your math skills then you may want to check out Khan Academy's Algebra 1 course. This is a FREE course!

Also check with your local community college to see if Algebra courses are offered.

IBEW Apprenticeship Reading Comprehension

The reading comprehension measures your ability to retain information. Its simple to read a paragraph but to understand the context can be tricky. Here is a sample of what you're likely to see on the exam.

The timing of New Year's Day has changed with customs and calendars. The Mayan civilization, on what is now called the Yucatan peninsula of Mexico, celebrated the New Year on one of the two days when the noonday sun is directly overhead.

In the equatorial regions of the earth, between the Tropics of Cancer and Capricorn, the sun is in this position twice a year, once on its passage southward, and once on its passage northward. At the early Mayan city of Izapa in the southern Yucatan, the overhead date for the sun on its southward passage was August 13.

The Mayans celebrated this as the date for the beginning of the New Year. Later at the more northerly Mayan site at Edzna, the corresponding overhead date is July 26. Analyzes of Mayan pictorial calendars indicate that they celebrated the New Year on August 13 prior to 150 AD, and on July 26 after that year.

This change has been explained by archaeological dating showing that 150 AD was the time that the Mayans moved the hub of their civilization from the southern to the northern site.

1. According to the passage, the sun at Edzna was directly overhead at noon on:

A. July 26 only
B. August 13 only
C. July 26 and one other date
D. August 13 and one other date

2. If the Mayans had moved their civilization's center south of Izapa, their new date for celebration of the New Year would probably have been closest to which of the following dates?

A. January 1
B. February 20
C. March 25
D. September 15

3. Based on the information in the passage, which of the following statements is true?

A. Mayans made Edzna the capital because it was more temperate than Izapa.
B. All Mayans moved to Edzna in 150 AD.
C. Mayans used calendars to mark the passage of time.
D. The Mayan city of Izapa was destroyed in 150 AD.

Answer Key:

Algebra

1. B
2. A
3. C
4. A

Reading Comprehension

1. C
2. D
3. C

# 4. Waiting For Your Interview

This is by far the most frustrating and nerve racking part of the whole process. Many training centers only accept applicants once or twice a year and having to wait for months without knowing if you'll be accepted can drive you crazy.

Stay calm and don't call the apprenticeship office a thousand times asking why you haven't heard anything back. Be patient, they'll notify you when you've been selected and set up a time to do an interview.

# 5. The Interview

The interview panel consists of members from the National Electrical Contractors Association (NECA) and the International Brotherhood of Electrical Workers (IBEW). Based on the interview and a review of your qualifications, you will receive an overall ranking.

Sample questions you may be asked during the interview:

Why do you want to be part of this program?

What kind of electrical experience do you have?

Do you work better as a team or alone? Why?

Describe a time where you did a project from start to finish?

Tell us a situation when you had to complete a project where you did not have the necessary tools to finish it?

If you've been involved with a conflict tell us how you resolved it?

Here's a few tips for interviewing.

When answering questions make an effort to give a straight forward answer and don't ramble on.

Keep your answers on topic and don't use filler words like "um" or "uhh".

Don't cross your arms. Clasp your hands together and sit still, don't squirm.

Take time to formulate your response before speaking.

Have a positive attitude, it speaks volumes about you.

Present yourself in a professional manner. No suit and tie, but dress for success. A pair of slacks or nice jeans, nice shirt (no T-shirts), clean shoes, and a fresh haircut and shave (or at least trim your gruffy face).

Be honest! Tell them what you're looking to get out of the program and why you think you're an ideal candidate. Remember that your dedicated, show initiative to learn, and have a strong work ethic.

Maintain eye contact. Look whomever is questioning you in the eye and give them solid answers.

Give everyone in the interview room a firm handshake and look them in the eye.

Don't smell like alcohol or cigarettes.

Get good rest at night.

Remember that as an apprentice you're starting from the bottom tier. That means you're more labor than skill and you'll be put to work accordingly; ie. digging trenches, setting up scaffolding and ladders, crawling in dark and dirty places, carrying material.

Safety is priority # 1 and must be taken into consideration when answering questions. Example answer: "whatever it takes to get the job done; safely and by the book."

Post Interview

After the interview your name will be placed on an eligibility list for two (2) years. As new positions become available in the apprenticeship program, names will be taken off the eligibility list in order of the ranking score. If you are not selected to begin an apprenticeship during that two-year period, you will need to reapply if you are still interested.

But don't fret, you nailed the interview and scored highly on the aptitude exam. Now its time to wait for the letter that will change your life.

Growing Your Gift in a School of Worship

Education has been taken to great heights today and sometimes it is all about concentrating on the gifts that are God given. Sometimes it is necessary to get some help in reaching your goals or learning how to utilize your gift fully.

For media arts teams, musicians, worship leaders and others who have a talent in this area, there are programs that have been designed so as to help you grow your gift to limits you may not have thought possible. This kind of education equips you with all the necessary tools that will allow such a person to serve within a local church or any other institution that they may find themselves in.

Schools of worship don't restrict education to technical skills as well as musicianship. They also concentrate on developing a very strong and solid foundation based on biblical theology. This means that you not only get nurtured but also get a deeper understanding of God making you appreciate our maker more.

What to expect?

Most schools of worship have strong religious ties and they base their education on theological principles. You should expect to find teachers with great skills and gifts in such a school. There are also teachers who have got great experience in this area and they prove to be the best when it comes to such matters. This is one of the things to bear in mind when you are choosing a worship school.

Eligibility

Schools of worship are all about investing in the upcoming generation of worship leaders and worshippers. This kind of school is ideal for anyone with great talent in that area. This is a place where your gifts can grow so as to offer some benefit to Christ. It is always advisable to think very carefully before you enroll. Most schools advice that the potential students pray about joining the school so as to get some insight on whether it is truly their calling or not.

You should be willing to grow your God given gifts before you enroll in a school of worship.

The types of classes that one can attend

One of the main classes that students are required to attend at such an institution is the theological classes which form the core of the studies. This is usually mandatory for all the students.

There are also the practical classes where students are allowed to choose the different areas that they want to participate in. In most cases, you can either choose music or media arts in some institutions. Music track classes usually entail learning music theory and participating in making music whole media arts is mainly based on video production and so on.

It is necessary to give the students in depth training on a spiritual level as well as on a practical level. When you are selecting a worship school, ensure that both areas are well covered by your institution of choice. Sometimes it may be necessary to get private lessons, participate in recitals and chapel services and so on so as to further develop skills that you want to achieve. Sometimes a school of worship can be a stepping stone to a higher learning institution.